Bilstien 5100 adjustable lift shocks installed

[BroncoDon]

I just had 4wheel parts install my shocks they seem a little stiffer than the factory , I put it on a stock black diamond non-Sasquatch , this Saturday I’ll be putting my wild track tires and wheels on and I will update my photos

 

[BroncoDon]

Got my wild track tires and wheels intalled today, I think with the lift I’m still about 1” taller than a factory Sasquatch, my Speedo is off by 4-5 mph, not sure if I well just get used to it or have someone fix it for me in forscan, the ride is very nice and I’m very happy with this set up, total cost installed at 4wheel parts was about $1450 with alignment.

 

[Dusty]

Looks good Don!

 

[BroncoDon]

Yeah thanks Dusty, I just am Wondering about the angle of my tie rods and my axles seems like the angles at least an inch lower than it was I don’t know if it did that on your suspension if that’s OK or not

 

[Dusty]

Yeah thanks Dusty, I just am Wondering about the angle of my tie rods and my axles seems like the angles at least an inch lower than it was I don’t know if it did that on your suspension if that’s OK or not

Any amount of suspension lift is going to increase the angle on the tie rods, which is less than ideal for the steering rack, if you've read about that on the forums. But I believe with a modest lift and under 35" tires you won't have any issues. On mine, I have about a 2-3" lift but sticking with 35's, and no front locker. I carry a spare tie rod but I think I'll be OK for a while.